POWERFLEX RV-K cable is suitable for all types of low voltage industrial-type connections, in urban grids, building installations, etc. Its high flexibility makes the installation process substantially easier and, as a result, is particularly suitable for use in difficult layouts. It can be buried or installed in a tube as well as outdoors without requiring additional protection. This cable can withstand damp conditions including total immersion in water (AD7).
POWERFLEX RV-K cable performance
LOW VOLTAGE 0,6/1kV
IEC 60502-1 - UNE 21123-2
AENOR / BUREAU VERITAS / KEMA KEUR / CE / RoHS
Construction Product Regulation
Maximum service temperature: 90ºC.
Maximum short-circuit temperature: 250ºC (max. 5 s).
Minimum service temperature: -40ºC (fixed and protected installations).
Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.
Reduced halogen emission. Chlorine <15%.
Minimum bending radius: x5 cable diameter.
Impact resistance: AG2 Medium severity.
Chemical & Oil resistance: Good.
UV Resistant: UNE 211605.
Water resistance: AD7 Immersion
Meter by meter marking.
Available in rolls (lengths of 100 m) and drums.
POWERFLEX RV-K cable design
Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
Cross-linked polyethylene (XLPE)
The standard identification of insulated conductors is the following:
1 x Natural
2 x Blue + Brown
3 G Blue + Brown + Green/yellow
3 x Brown + Black + Grey
3 x + 1 x Brown + Black + Grey + Blue (reduced cross-section)
4 G Brown + Black + Grey + Green/yellow
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Blue + Green/yellow
Flexible PVC, black colour.